Drip Irrigation and Soaker Hose 25 PSI Pressure Regulator, 3/4" Female x 3/4" Male Hose Threads Lead-Free Brass (With Regular O-Ring, 2, Count)

This heavy duty 25 psi lead-free brass pressure reducer regulator is ideally suited for use with drip systems, drip lines, and emitters, soaker hoses, or any application where low water pressure is desired. Its 3/4 inch hose thread is designed to connect to a standard hose bib and garden hose in the USA and Canada.

• Maintains water pressure between 20-30 psi (25 psi nominal). 0-7.5 GPM (gallons per minute) flowrate. Maximum Inlet Pressure: 135 psi. Note: As with most drip system and soaker hose pressure regulators, the outlet pressure might slowly build up above 30 psi if the outlet is completely shut.
• Inlet Size: ¾" FHT (female hose thread). Outlet Size: ¾" MHT (male hose thread). Connects to a standard hose bib or garden hose in USA and Canada.
• It may be connected to an automated timer, backflow preventer, or filter, if desired. The regulator body is made of solid lead-free brass which contains less than 0.25% lead.
• Upgrade your plastic regulator to this durable, heavy duty lead-free brass regulator. It is able to withstand a higher inlet pressure compared to a typical plastic regulator and is impervious to sunlight.
• Note: Some garden hoses are made with aluminum fittings. To avoid galvanic corrosion, do not connect this regulator to aluminum fittings for prolonged period of time.