Bringsmart Micro DC 12V 600rpm Geared Motor with Bracket Centric Ouput Shaft Gear Motor with Wireless Controller 37mm Diameter Gearbox Large Torque Reduction Motor

JGB37-520X DC Gear Motor 12V 600RPM with Bracket and Wireless Controller for Direction Reverse

• [Parameter] Voltage DC12V, No load speed 600rpm, Load speed 535rpm, Load torque 0.19kgf.cm, Load current 0.6A, Stall current 1.65A, Power 10W.
• [Wireless controller] Working voltage: 12V or 24V DC; Receiving sensitivity: 105dB; The relay contact capacity: 10A 250VAC/10A 30VDC; Operating frequency: 433MHz-315MHZ; Size: 2.95x2.16x1.10 inch
• [Wirelss Controller Work mode] M4 (Jog: Press grimdeath outputs, let go to stop output), L4 (interlock: Road at the same time there can be only one output), T4 (self-locking: Road mutual independent output, independently of each other, click the output and click stops output). ,open space without interference load test 328ft (100 meter) [radio products practical application vary depending on the environment from the remote control, the gap is very large.
• [Features] All Metal Gears, high-temperature resistance, high abrasion resistance, strong load capacity, sturdy and durable. Steel 5.5mm D Output Shaft, using high hardness steel, good toughness, impact resistance. Pure Copper Rotor. with precision winding technology, the geared motor power instant increased by 30%.
• [Package] 1pcs JGB37-520 gear motor, 1pcs 37mm mounting bracket, 6pcs M3 screws for locking motor and bracket, 4pcs M3 screws and nuts for mounting bracket, 2pcs 4.8mm reed terminal and sheathed female connector for connecting motor to wires. 1pcs control module, and 1pcs remote controller.