Anchorlube All-Purpose Metalworking Compound 1 Gallon - Water-Based Cutting Fluid for Drilling, Tapping, Sawing - Great on Stainless Steel | No Oil

ABOUT Anchorlube is the future of multi-purpose lubricants, offering a new level of tool-life along with the cleanliness of a water/soap based compound. Anchorlube is a semi-paste and performs well on all metals, especially stainless steel and other exotic metals that tend to shorten tool life considerably. USES Anchorlube is the best product available for stainless, high-carbon, high-chrome, cast iron monel, etc. It is also the solution for difficult metalworking operations such as along welds on carbon steel. It can be used for: drilling tapping sawing spot facing counter boring milling seat forming drawing piercing punching and many others Anchorlube may also be used on non-ferrous metals such as brass and aluminum. Anchorlube is used by machinists, electricians, plumbers, welders, HVAC technicians and many more. ENVIRONMENTALLY SAFE Anchorlube contains NO sulfur, chromates, nitrates, lead, lithium, tin, copper, formaldehyde, chlorine/fluorine, silicon, oil or VOCs of any type; and comes in a distilled water formulation for critical operations. It is a clean lubricant that contains no petroleum and is a water-based soap. STORAGE, HANDLING AND PROPERTIES Smooth, green semi-paste Store at room temperature. Keep capped to avoid clogging.Consistency may vary with temperature. Melting point is between 75 deg. F and 80 deg. F Summer temperatures reduce its viscosity; and while under winter temperatures it is a fairly heavy paste These changes have no effect on use, efficiency, or performance.

• Prolongs Tool Life
• Water-based - Non-hazardous
• Fast, smooth cut - even with exotic metals