| Management number | 221100043 | Release Date | 2026/05/03 | List Price | US$48.40 | Model Number | 221100043 | ||
|---|---|---|---|---|---|---|---|---|---|
| Category | |||||||||
Starting Method1. Turn on the switch.2. Before each start, press the oil bubble to suction oil into the oil pipe.3. When the cold machine starts, close the damper switch first.4. When ignition is heard, pull the start handle 5-8 times.5. Open the damper switch.Drill Installation Steps1. Connect the drive shaft.2. Insert the bolt.3. Put the pin to lock it.SpecificationMaterial: PP, Steel, Rubber, Aluminum, Iron, Carbon SteelColor: Orange, BlackEngine Type: Single Cylinder, 2-stroke, Air-cooledDisplacement: 52ccMixed Fuel: Gasoline:Two-stroke Oil (25:1)Ignition System: C.D.I.Power: About 1.7kwHorsepower: 2.3hpFuel Tank Capacity: 1.2L/0.3galSpeed: 6500-8500r/minNo-load Speed: 2800-3200r/minFuel Consumption: 610g/kw·hDrill Diameter: 10cm/3.9inch, 15cm/5.9inch, 20cm/7.9inchDrill Length: 75cm/30inchShaft Size: 2*5cm/0.8*2inchEngine Size: 22.5*22*15cm/8.9*8.7*6inchDigger Whole Size: 50*23cm/20*9inchExtension Bar Length: 30cm/11.8inchDigger Package Size: 35*28.5*29cm/13.8*11.2*11.4inchDrill Package Size: 80.5*22*33cm/31.7*8.7*13inchDigger Gross Weight: 9kg/20lbsDigger Net Weight: 8.1kg/18lbsDrill Gross Weight: 9.5kg/21 lbsDrill Net Weight: 7.35kg/16.2lbsPackage Included1 x Auger Post Hole Digger1 x Extension Bar3 x Drills1 x Fuel Oil Mixing Bottle1 x Funnel1 x Spare Starter1 Pair x Goggles1 x English ManualTool Kit for Assembly
| Set Name | Post Hole Digger Set |
|---|---|
| Brand Name | DONSU |
| Shank Type | Straight |
| Unit Count | 1.0 Count |
| Part Number | Auger Drill Bits |
| Finish Types | Uncoated |
| Manufacturer | DONSU |
| Material Type | Alloy Steel |
| Tool Flute Type | Straight |
| Cutting Diameter | 8 Inches |
| Number of Flutes | 2 |
| Cutting Angle String | 6E+1 Degrees |
| Surface Recommendation | Soil |
If you notice any omissions or errors in the product information on this page, please use the correction request form below.
Correction Request Form